Steel Dump Inserts

EZ-Dumper® inserts are tough. Our products are designed, engineered and manufactured to deliver dependable performance in tough conditions and extreme environments – the perfect solution for safely & efficiently moving any load from one jobsite to another.

Made from steel or stainless steel construction, our inserts are available in standard 8’ size with 2 cubic yard capacity to fit most full-size pickups, and smaller 6’ model with 1.5 cubic yard payload capacity available to fit most short-bed trucks. EZ-Dumper® inserts are designed and manufactured to perform.

Easy to Install and Operate

Simple to install. Our dump inserts bolt directly to most full-size pickup trucks in two or three hours with few or no alterations or mods required. All you need are a few common tools.

Nearly effortless operation. To empty a payload, simply open the tailgate and with the push of a button on your remote, dump and lower via a 12V Monarch Hydraulic Double-Acting Pump connected directly to your truck’s battery. The EZ-Dumper® lifts to an angle of 51 degrees in about 15 seconds for a quick and clean unloading. Never unload your truck by hand again.

Features

The Original Hydraulic Dump Insert for Trucks (Since 1972)
6,000lb Lift Capacity
12 Gauge Steel Floor
14 Gauge Steel Sides
Expansion Stake Pockets (outside)
Full-length Flat Bar Rub Rails
Durable Powder Coat (Black) protects against premature rust and corrosion
2 Cubic Yards of Capacity (8′ Insert, Upgradable to 4 Cubic Yards with Mounted Sideboards and Cab Protector)
Convert Your Pickup into a Dump Truck in 2 or 3 Hours without the Overhead Expense
Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
Full Front-to-Tailgate, Parts and Labor Two Year Warranty
Fits Most Full-Size Trucks
Short Bed 6′ Truck Insert Also Available (EZ0012TSB)

IMPROVE YOUR PRODUCTIVITY TODAY

Technical Specs - 8' Steel Insert

Insert Type

Bed Length

Unloaded Weight

Payload Capacity

Volume Capacity

Dump Angle

Frame Construction

Side Steel

Deck Steel

Tailgate

Energy Source

Power Unit

Cylinder(s)

Hydraulics

Remote Control

Tie-down Features

Expansion Features

Lubrication

Installation

Standard Color

Warranty

EZ0012T 8′ Dump Insert

96″

787 lb

6000 lb

2 Cubic Yards

51 Degrees

Structural Steel Angle

14 Gauge

12 Gauge

Double-Acting Removable Spreader

Truck Battery

Double Acting Monarch Pump

Mounted Under Unit

Power Up/Power Down

Standard

Full Length Flat Bar Rub Rails

8 Stake Pockets (outside)

Thread in Grease Fittings on Pivots

Four Bolt-Down Clamps

Powder Coat Black

2 Years Front to Tailgate

Technical Specs - 6' Steel Insert