Hoosier
Stainless Steel Dump Inserts
EZ-Dumper® inserts are tough. Our products are designed, engineered and manufactured to deliver dependable performance in tough conditions and extreme environments – the perfect solution for safely & efficiently moving any load from one jobsite to another.
​
Made from steel or stainless steel construction, our inserts are available in standard 8’ size with 2 cubic yard capacity to fit most full-size pickups, and smaller 6’ model with 1.5 cubic yard payload capacity available to fit most short-bed trucks. EZ-Dumper® inserts are designed and manufactured to perform.
​
Easy to Install and Operate
Simple to install. Our dump inserts bolt directly to most full-size pickup trucks in two or three hours with few or no alterations or mods required. All you need are a few common tools.
​
Nearly effortless operation. To empty a payload, simply open the tailgate and with the push of a button on your remote, dump and lower via a 12V Monarch Hydraulic Double-Acting Pump connected directly to your truck’s battery. The EZ-Dumper® lifts to an angle of 51 degrees in about 15 seconds for a quick and clean unloading. Never unload your truck by hand again.
​
​
Features
-
The Original Hydraulic Dump Insert for Trucks (Since 1972)
-
6,000lb Lift Capacity
-
12 Gauge Steel Floor
-
14 Gauge Steel Sides
-
Expansion Stake Pockets (outside)
-
Full-length Flat Bar Rub Rails
-
Durable Powder Coat (Black) protects against premature rust and corrosion
-
2 Cubic Yards of Capacity (8′ Insert, Upgradable to 4 Cubic Yards with Mounted Sideboards and Cab Protector)
-
Convert Your Pickup into a Dump Truck in 2 or 3 Hours without the Overhead Expense
-
Removable, Double-acting Tailgate Lets You Dump, Then Spread What You Dump
-
Full Front-to-Tailgate, Parts and Labor Two Year Warranty
-
Fits Most Full-Size Trucks
-
Short Bed 6′ Truck Insert Also Available (EZ0012TSB)
IMPROVE YOUR PRODUCTIVITY TODAY
Technical Specs - 8' Steel Insert
Insert Type
Bed Length
Unloaded Weight
Payload Capacity
Volume Capacity
Dump Angle
Frame Construction
Side Steel
Deck Steel
Tailgate
Energy Source
Power Unit
Cylinder(s)
Hydraulics
Remote Control
Tie-down Features
Expansion Features
Lubrication
Installation
Standard Color
Warranty
EZ0012TSS 8′ Stainless Steel Dump Insert
96″
777 lb
6000 lb
2 Cubic Yards
51 Degrees
Structural Stainless Steel Angle (Top Frame)
14 Gauge
12 Gauge
Double-Acting Removable Spreader
Truck Battery
Double Acting Monarch Pump
Mounted Under Unit
Power Up/Power Down
Standard
Full Length Flat Bar Rub Rails
8 Stake Pockets (outside)
Thread in Grease Fittings on Pivots
Four Bolt-Down Clamps
304 Stainless Steel (Unfinished)
2 Years Front to Tailgate
Technical Specs - 6' Steel Insert
Insert Type
Bed Length
Unloaded Weight
Payload Capacity
Volume Capacity
Dump Angle
Frame Construction
Side Steel
Deck Steel
Tailgate
Energy Source
Power Unit
Cylinder(s)
Hydraulics
Remote Control
Tie-down Features
Expansion Features
Lubrication
Installation
Standard Color
Warranty
EZ0012TSS-SB 6′ Dump Insert
74-1/8″
690 lb
6000 lb
1.5 Cubic Yards
51 Degrees
Structural Stainless Steel Angle (Top Frame)
14 Gauge
12 Gauge
Double-Acting Removable Spreader
Truck Battery
Double Acting Monarch Pump
Mounted Under Unit
Power Up/Power Down
Standard
Full Length Flat Bar Rub Rails
6 Stake Pockets (outside)
Thread in Grease Fittings on Pivots
Four Bolt-Down Clamps
304 Stainless Steel (Unfinished)
2 Years Front to Tailgate
Available Options
-
Steel Cab Protector
-
Tarp Kit
-
20″ High Steel Side and Tailgate Extensions
-
12″ High Steel Side Extension Bracket Kit (holds 2×12 board)
-
19″ High Steel Side Extension Bracket Kit (holds 2×12 board)
-
Coal Chute Spreader Tailgate